Well It's has been about ten day since I last worked on the Galaxie. So my plan this weekend has been to get the frame painted, and ready to start putting parts back on. So on Friday I loaded up the frame on a trailer and took it down to a car wash, where I socked the frame in grease remover, and lots of hot water. Then brought the frame back, where I set it up on jack stands up side down. 
Today I sprayed two coats of rust encapsulater on the frame; which took a few hours to do. The frame has to sit for about eight hours before spraying a coat or two of primer over the encapsulter. Before putting the primer on, the frame has to be sanded with 320 grit sand paper. Then once the primer sets up (about 2 hours), I can spray on the final black epoxy paint. I hope to have this done on Sunday.
Looks Pretty Good 
Has a flat look to it
Today I sprayed two coats of rust encapsulater on the frame; which took a few hours to do. The frame has to sit for about eight hours before spraying a coat or two of primer over the encapsulter. Before putting the primer on, the frame has to be sanded with 320 grit sand paper. Then once the primer sets up (about 2 hours), I can spray on the final black epoxy paint. I hope to have this done on Sunday.
Looks Pretty Good 
Has a flat look to it
No comments:
Post a Comment