I worked on the Galaxie Friday & Saturday for a total of about 13 hours. I was able to put a wood floor under the frame, to cut down on the dust and dirt. I pressed out all the bushings, and ball joints from both the upper & lower A-arms, and ordered new ones. I sanded both the doors, one fender and the front cowl piece with 180 grit sand paper. Today I painted all four parts with sealer, and I started sanding the hood. Here are some pictures of the doors, fender, and cowl after being sprayed with sealer, and the hood sanded with 180 grit sand paper. I circled with a marker two low spots on the hood that will need to be filled, before being sprayed with sealer.