Okay I am down to the removal of just two bolts and the frame will be ready to be bead blasted. I do not have a socket big enough to remove the front bolt on the arms, and so I will make a trip to NAPA on Monday. I am almost to the point where all I will have left to do is start putting the parts back on.

I was able to get the rear end off today with little to no problems at all. I need to take the springs off the axle, and then disassemble the rear end, so I can paint it and get it ready to put back on the frame. The plan is to order the air bag system from Air Ride here in the next few weeks.

I took the front drum brakes off the spindles today, becasue I will be using disc barkes on the front and keeping drums on the back. So I need to clean up and paint the spindles before putting the disc barkes on them.